GSM/SMS/GPRS PLC,ideal solution for remote control& monitoring &alarming applications ,PT100,temperature controller /detector

*CE,ROSH approval *Modbus RTU/ASCII/TCP protocol *GPRS, SMS and CLIP support *Autonomous login into GSM/GPRS network

Complete Telemetry Solutionx-Messenger- Expandable GSM/GPRS PLC

incorporates a wide range of CPUs, expansions, various accessories and software, specially designed for GSM/GPRS wireless systems being used for remote measurements, datalogging, control, diagnostics and object via short text messages (SMS) or CLIP calls. Configurable messages sending from device with static (text) or dynamic (text and measured values) content are a convenient way of passing important information to the monitoring center, or directly to the defined phone numbers. SMS messages sending orCall-out can be triggered by change of binary input state,reaching alarmthresholds, marker state change, counters and clocks.

In particular, x-Messenger shall possess industrial design,practical set of I/O resources& easy to use configuration software tools. Multiple optional analog signals (0..10V DC) (0…20mA) ,(PT100) inputs built-in the module , make it possible to have direct connection of sensors, which lowers the cost of building system. Hence, it can directly work with humidity sensors, water level sensor, pressure transducers,flow sensors, smoke, gas, motion, shock and noise detectors,etc.

Highlights at a glance

Ø Integral GSM 850/900/1800/1900 modemØ GPRS, SMS ,Email and CLIP supportØ Parameters in the programchanging by means ofSMS via cell phoneØ Autonomous login into GSM/GPRS networkØ Different I/O configurations available- 2DI/1DO, 4DI/2DO, 8DI/4DO- Analog inputs(DC0…10V,0/4..20mA,PT100)- Expandable up to 40DI/36DO,36AI/36DO- Expandable up to 16 PT100 inputsØ RTC, Timers and Counters, High speed inputØ Event based transmissionØ Remote configuration via GPRS and user friendlyeSmsConfig softwareØ Firmware upgrade via serial portØ Configurable filtration for digital inputsØ Relay (10A) and Transistor output optionalØ Configurable output pulse width

*Standard Modbus RTU/ASCII/TCP communicationprotocol supported

*Data logging ( SD card socket built-in/optional accessory)

specification

Model: EXM-6DC-PT100-R

Integral GSM 850/900/1800/1900 modem

Supply Voltage:12 ~ 24 VDC

Inputs:3 Channels PT100, tolerance:+/-0.5oC, temp range: -50oC- 200oC

Analog Input signal:no

Outputs:3 relay(10A)

PWM:no

High Speed Count(I7,I8):no

Voice alarming:no

Webcam Interface:no

Ethernet:no

Data logging:optional

Interface:1 B-type USB ,1 RS232 & 1 RS485

Communication protocol:Modbus RTU&ASCII

Expansion:yes

RTC:yes

LCD display with keypad:Optional(4*16 LCD)

Alarming mode:SMS ,email or Ring

output control mode:Standard config soft& Customized soft(Function block diagram)

GSM/SMS/GPRS PLC,ideal solution for remote control& monitoring &alarming applications ,PT100,temperature controller /detector